Superwinch 1125220 Terra 25 2500lb Winch with Roller Fairlead and More

You looking to find the "Superwinch 1125220 Terra 25 2500lb Winch with Roller Fairlead and More" Good news! You can purchase Superwinch 1125220 Terra 25 2500lb Winch with Roller Fairlead and More with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $176.35    

Product Feature

• High efficiency, low amp draw, sealed 1.3 hp permanent magnet motor featuring mechanical load holding and dynamic brake
• 50' of 3/16" steel wire rope and ergonomic cam action freespooling clutch
• All steel planetary gear twice as wide as those used by the competition and utilizing machined-in, oil pocket bronze bearings
• Circuit breaker protected and weather sealed solenoid contact
• 4-way roller fairlead, heavy duty latched hook with thimble and limited lifetime warranty

Product Description

Superwinch Terra 25 Winch cable version comes with a roller fairlead, mounting plate, handlebar mount toggle, and handheld remote. Steel drum is designed for use with either cable or synthetic rope.

Superwinch 1125220 Terra 25 2500lb Winch with Roller Fairlead and More Review

I purchased this winch to go on my 2011 Rancher 420. I must say that so the wiring installation was straight forward. I also purchased the Superwinch mounting plate to match. This winch is a little large "framed" to fit on the fourwheeler. I did make it fit but it was a tight one. Rubber hammer was a necessity. Overall I believe it was a good value and definately a step up in quality from the cheap ebay winches.

Most of the consumer Reviews tell that the "Superwinch 1125220 Terra 25 2500lb Winch with Roller Fairlead and More" are high quality item. You can read each testimony from consumers to find out cons and pros from Superwinch 1125220 Terra 25 2500lb Winch with Roller Fairlead and More ...

2-Count Neodymium Magnet N42 EPOXY 1.5" x 3/4" x 3/8" /w 2 Countersunk Holes for #6 Screws

You looking to find the "2-Count Neodymium Magnet N42 EPOXY 1.5" x 3/4" x 3/8" /w 2 Countersunk Holes for #6 Screws" Good news! You can purchase 2-Count Neodymium Magnet N42 EPOXY 1.5" x 3/4" x 3/8" /w 2 Countersunk Holes for #6 Screws with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $10.93    

Product Feature

• Neodymium Iron Boron (NdFeB) Rare Earth Magnets
• Package of 2 Magnets
• Grade - N42
• 70.97 lbs Holding Power
• 1.5'' length x 3/4" width x 3/8" height

Product Description

Neodymium magnet for home made wind genertors! The size and grade are exactly for Hugh Piggott's wind generator plan.
Material: Rare Earth Magnets, also NdFeB or super strong magnets

Gauss Rating: 11,800 Gauss

Holding Power: 70.97 lbs

Applications: Wind Generator (Hugh Piggott's Plan), Water Treatment System. Annotation: There is a hole of 1/8" diameter centered on the flat side of the block with a counter sink

About Neodymium Magnets:

Neodymium magnets are one of rare earth permanent magnets. Neodymium magnets are also known as NdFeB magnets, or neo rare earth magnets. Since it's very strong, people also simply call it super strong magnets or super powerful magnets. The major elements of this magnet include neodymium (Nd), iron (Fe) and boron (B), or NdFeB.

2-Count Neodymium Magnet N42 EPOXY 1.5" x 3/4" x 3/8" /w 2 Countersunk Holes for #6 Screws Review

MOST POWERFUL MAGNET I HAVE BOUGHT YET! ITS AMAZING IM SO IMPRESSED! Will buy from this company again. Also I did buy some smaller magnets from another company,yet the other company claimed they had n48, and I compared the strength of the two. CMS Magnetics Definitely won that hands down. Just to think...this is a N42, it blows my mind to imagine what n48 and n50 would be like, almost scary lol. The epoxy coating seems to work well also, another plus considering I've only seen CMS Magnetics make such magnets. Anyways A+!

Most of the consumer Reviews tell that the "2-Count Neodymium Magnet N42 EPOXY 1.5" x 3/4" x 3/8" /w 2 Countersunk Holes for #6 Screws" are high quality item. You can read each testimony from consumers to find out cons and pros from 2-Count Neodymium Magnet N42 EPOXY 1.5" x 3/4" x 3/8" /w 2 Countersunk Holes for #6 Screws ...

JET 101704 SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist

You looking to find the "JET 101704 SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist" Good news! You can purchase JET 101704 SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $157.99    

Product Feature

• All steel construction with a durable powder coat finish.
• Lightweight, compact design for low headroom applications.
• Needle bearing supported load sheave for smooth operation
• Induction hardened grade 80 load chain
• Standard hand chain drop equals lift length

Product Description

Jet, 1 Ton Capacity, Manual Chain Hoist, 10' Of Lift, All Steel Construction With A Durable Powder Coat Finish, Lightweight, Compact Design For Low Headroom Applications, Completely Enclosed Weston Type Automatic Brake System For Precise Load Spotting, Triple Spur Gears Provide High Efficiency Ratio With Minimum Effort, Drop Forged Hooks With Heavy Duty Safety Latches Swivel 360 Degrees For Easy Rigging, Proof Tested With Test Certificate, Other Size Hoists & Lifts As Well As Trolleys, Beam Clamps & Slings Can Be Ordered & Drop Shipped From Jet, 5 Year Warranty.

JET 101704 SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist Review

Jet SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist #101704 I have had 50 years experience working with hoist of different types, automotive use, Construction, and in the military as a Machinest Mate. This hoist is as good as any 1 ton I have ever used. The pull is very smooth and the hoist does not know it even has a load on it when lifting my 600 pound garden tractor. This product made me buy the JET brand 8" benchgrinder I have been compairing with other brands.

Most of the consumer Reviews tell that the "JET 101704 SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist" are high quality item. You can read each testimony from consumers to find out cons and pros from JET 101704 SMH-1T-10 1-Ton Capacity 10-Foot Chain Hoist ...

National Mfg. N243584 No-Rust Pulleys

You looking to find the "National Mfg. N243584 No-Rust Pulleys" Good news! You can purchase National Mfg. N243584 No-Rust Pulleys with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $3.54 $1.32   

Product Feature

• National #N243-584 1/2" Single Pulley
• NATIONAL MFG CO

Product Description

Weather, scrapes, scratches or cuts will not make these pulleys rust. They stay smooth operating and corrosion Free. Bodies are die cast zinc, double plated with copper and nickel. Sheaves are solid brass. Axles are rust resistant steel. Quality throughout.

National Mfg. N243584 No-Rust Pulleys Review

Works great as a ky chain fob ha ha. This is a really small pulley, I guess I just don't know my sizes, well made very small

Most of the consumer Reviews tell that the "National Mfg. N243584 No-Rust Pulleys" are high quality item. You can read each testimony from consumers to find out cons and pros from National Mfg. N243584 No-Rust Pulleys ...

Vestil PLB/S-5 Prylever Bar, Steel, 5' Length, 5000 lbs Capacity

You looking to find the "Vestil PLB/S-5 Prylever Bar, Steel, 5' Length, 5000 lbs Capacity" Good news! You can purchase Vestil PLB/S-5 Prylever Bar, Steel, 5' Length, 5000 lbs Capacity with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $125.00    

Product Feature

• Durable blue powder coat finish
• Thick steel nose plate has a beveled edge
• Steel construction

Product Description

Provide dock workers, riggers, and freight handlers with the leverage needed to get underneath heavy objects for transporting with fork truck, hand truck, pallet truck, or machinery movers. Two 5" by 2" poly-on-steel wheels. 6" width by 8" length by 1/2" thick steel nose plate with beveled edge is bolted on the wood handle units and welded on the steel units. Steel units feature powder coat blue finish.

Vestil PLB/S-5 Prylever Bar, Steel, 5' Length, 5000 lbs Capacity Review

Works great. I have used it to move large peices of equipment and it has worked gread. I removed the rear kick stand for higher lift.

Most of the consumer Reviews tell that the "Vestil PLB/S-5 Prylever Bar, Steel, 5' Length, 5000 lbs Capacity" are high quality item. You can read each testimony from consumers to find out cons and pros from Vestil PLB/S-5 Prylever Bar, Steel, 5' Length, 5000 lbs Capacity ...

Agri-Fab 1000-Pound Heavy Duty Steel ATV Tow Tandem Axle Cart 45-0350

You looking to find the "Agri-Fab 1000-Pound Heavy Duty Steel ATV Tow Tandem Axle Cart 45-0350" Good news! You can purchase Agri-Fab 1000-Pound Heavy Duty Steel ATV Tow Tandem Axle Cart 45-0350 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $799.00 $779.99   

Product Feature

• 1000-pound load capacity
• 16-gallons 32.5-by-61-by-12-inch steel bed construction.
• 19 ga removable tailgate with reinforced guides
• 18--by-9.5-inch knobby tread tires with needle bearings and grease zerks for high speeds and rough terrain
• Stake side railing kit included for securing cargo

Agri-Fab 1000-Pound Heavy Duty Steel ATV Tow Tandem Axle Cart 45-0350 Review

I use this Cart everyday around my horse farm. It did have to be modified though. When you go to dump the load there is not enough distance between the end of the cart and the ground. I had somebody drill holes and put 4x4's under the cart to lift it another four inches off the ground. The tires are worth what you pay for the whole cart so although it did cost a little $ to modify it the payoff was worth it. I am still using my cart and it is now 2013!

Most of the consumer Reviews tell that the "Agri-Fab 1000-Pound Heavy Duty Steel ATV Tow Tandem Axle Cart 45-0350" are high quality item. You can read each testimony from consumers to find out cons and pros from Agri-Fab 1000-Pound Heavy Duty Steel ATV Tow Tandem Axle Cart 45-0350 ...

Fastlane CPRPKIT1-8 8 Pieces Optional Anti-Slip Rubber Pad Kit for FL1X4 or FL2X1.75 Cable Protector

You looking to find the "Fastlane CPRPKIT1-8 8 Pieces Optional Anti-Slip Rubber Pad Kit for FL1X4 or FL2X1.75 Cable Protector" Good news! You can purchase Fastlane CPRPKIT1-8 8 Pieces Optional Anti-Slip Rubber Pad Kit for FL1X4 or FL2X1.75 Cable Protector with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $12.99 $9.99   

Product Feature

• For FL1X4 or FL2X1.75 cable protector
• Including 8 rubber pads

Product Description

For added traction on smooth surfaces, anti-slip rubber pad kits may be purchased for all 1 channel and 2 channel fastlane drop over cable protectors. 0.13 lbs weight.

Fastlane CPRPKIT1-8 8 Pieces Optional Anti-Slip Rubber Pad Kit for FL1X4 or FL2X1.75 Cable Protector Review

If you buy the Fastlane cable protector and you plan to use it on a non-porous hard surface, I'd strongly suggest purchasing these. The cable protectors are quite slippery on hard surfaces, but not such a problem on, say, carpets.

Most of the consumer Reviews tell that the "Fastlane CPRPKIT1-8 8 Pieces Optional Anti-Slip Rubber Pad Kit for FL1X4 or FL2X1.75 Cable Protector" are high quality item. You can read each testimony from consumers to find out cons and pros from Fastlane CPRPKIT1-8 8 Pieces Optional Anti-Slip Rubber Pad Kit for FL1X4 or FL2X1.75 Cable Protector ...

Troy DPH11 Professional 15' Drywall Panel Hoist Jack Lift Lifter Tool +Extension

You looking to find the "Troy DPH11 Professional 15' Drywall Panel Hoist Jack Lift Lifter Tool +Extension" Good news! You can purchase Troy DPH11 Professional 15' Drywall Panel Hoist Jack Lift Lifter Tool +Extension with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $189.99    

Product Description

Our Troy Drywall Lift is made from an all welded steel construction, tool-free assembly and teardown, single stage winch with brake, and can be used by one person. It has a 11' maximum reach for horizontal ceilings, and 15' maximum reach for walls (determined by the 11' max lift and half the length of drywall). With the extension that is included it makes the lift go 4' higher on walls and ceilings. When the extension is on it can reach 15' maximum reach for horizontal ceilings, and 19' maximum reach for walls. It can hold a 4' x 16' single sheet capacity, with a 150 lbs load rating, has 5-Inch casters, and weighs 110lbs.

Troy DPH11 Professional 15' Drywall Panel Hoist Jack Lift Lifter Tool +Extension Review

received product in a timely manner and as advertised, no tools were required to assemble."but", ordered 6' extension which arrived at the same time main package did. after assembling tool it was time to add extension into the mix. was surprised to find no directions anywhere in the empty packaging, took a good look at mechanism and cable system which appeared to be a little complicated but can be figured out eventually. called company tool was shipped from and person answering phone was aware of no instructions situation, asked if instructions could be found on line somehow and was told no, and to lay extension on flat ground to achieve extension change over. the cable pulley system looks a little complicated for this tool and i would have felt better adding extension after having found instructions somewhere. there was also a cable splice included with packaging which once you see the operating system you'll know immediately this system cannot be spliced as cable splice part would suggest, thus, another reason for instructions. i will use this tool in it's present capacity to install drywall at an 8 to 10 foot level, but have a future 15 foot section where extension will be needed. i fully expect to have to fully disassemble tool in order to achieve this and anticipate purchasing a new length of1/8" steel cable to complete.

if i'm wrong anywhere in my analysis of this tool it's because there were no instructions for extension so, sorry to the shipper. now you know, do something about it. so, to be fair. this tool is sturdy enough to do the intended job. it's just there is little or no support from the shipper who is well aware of the lack of instructions for the extension part of this package.

Most of the consumer Reviews tell that the "Troy DPH11 Professional 15' Drywall Panel Hoist Jack Lift Lifter Tool +Extension" are high quality item. You can read each testimony from consumers to find out cons and pros from Troy DPH11 Professional 15' Drywall Panel Hoist Jack Lift Lifter Tool +Extension ...

Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread

You looking to find the "Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread" Good news! You can purchase Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $8.85    

Product Feature

• Thread 20 millimeter X 1.5 R.H. internal thread hollow
• Heat treated

Product Description

Flywheel Puller M20 x 1.5 right hand external thread hollow. Fits Honda VTR250 88-90, MR250, NX250, XL350 84-85, XR350R 84-85, CM400 79-81, CB400A/T 78-79, CB450SC 82-86, CM450 82-83, CMX450C, GL500 81-82, CX500T 82, CX500 78-82, CBR600F 87-90, CX650C 83, CX650TC 83, GL650 83, VF700C 87, VF750C 88, VT700C 84-87, VT750C 83, VFR800FI 98-00, VT800C 88, PC800 89-98, CBR900RR 00-03, VT1100C XR400 00-03, XR650R 00-05 ATC250ES 85-87, ATC250S x 85-87, ATC350 x 85-86, TRX250 85-87, TRX300FW, TRX300E x 93-02, TRX350 86-87, TRX350D 86-87, TRX400E x 99-02.

Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread Review

for those peeople that work on metric small engines nothing is more frustrating than finding out you don't have the right puller and the new one costs 65.00. i got this one it works on about 3 dozen differennt engines and it worked awesome and costs just a fraction of a honda one.

Most of the consumer Reviews tell that the "Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread" are high quality item. You can read each testimony from consumers to find out cons and pros from Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread ...

ARB Snatch Strap 3 1/4" x 30' 24000lbs

You looking to find the "ARB Snatch Strap 3 1/4" x 30' 24000lbs" Good news! You can purchase ARB Snatch Strap 3 1/4" x 30' 24000lbs with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $82.11 $81.70   

Product Feature

• 3 1/4" x 30' 24000lbs
• ARB snatch straps are elastic when under load whereas a tow strap is not
• For vehicle recovery, a snatch strap is more suitable than a tow strap.

Product Description

This ability to stretch is a distinction between a snatch strap and a tow strap, ARB snatch straps are elastic when under load whereas a tow strap is not, the benefits of which are twofold. Firstly, the kinetic energy generated by the elasticity actually aids the recovery itself, and secondly, the elasticity greatly reduces the likelihood of vehicle damage during recovery. The enormous weight of each 4x4 and the weighted force of whatever caused the immobilization puts enormous strain on the point where the straps are attached, and without some elasticity, there is a substantial risk of damaging the vehicle. For vehicle recovery, a snatch strap is more suitable than a tow strap.

ARB Snatch Strap 3 1/4" x 30' 24000lbs Review

a must have for anyone who recreates on sand !!
no more jarring from standard straps.
stretches and pulls stuck vehicle.
i've used it at pismo and winchester bay dunes with great results.

Most of the consumer Reviews tell that the "ARB Snatch Strap 3 1/4" x 30' 24000lbs" are high quality item. You can read each testimony from consumers to find out cons and pros from ARB Snatch Strap 3 1/4" x 30' 24000lbs ...